Uponor C-46 User Manual

CLIMATE CONTROLLER C-46 - INSTALLATION AND OPERATION MANUAL
38
8.12.1 Access level
The Basic access level includes all functions necessary for daily
use. To reach functions to change or adjust the set-up of the
system, the Installer access level is used.
To change the access level, do this:
1. Navigate through the screens using the navigation keys:
Uponor > Main menu > General settings > Access level
Example screen:
2. Select the required access
level and press OK.
8.12.2 Clock settings
The following functions are accessible from the Clock settings
menu:
• Set time and date, section
• Time format, section
• Date format, section
• Auto daylight saving, section
Set time and date
The screen for setting time and date is always selected during the
initial set-up procedure of the Climate Controller C-46 during
installation. See section 6.2.2 Set time and date, page 16.
To change time and date after initial set-up, the Installer access
level must first be set to Installer. See section 8.12.1
Access
level, page 38.
To set time and date, do this:
1. Navigate through the screens using the navigation keys:
Uponor > Main menu > General settings >
Clock settings > Set time and date
Example screen:
2. Set the time and date fields to the correct values and press
OK.
Time format
It is possible to choose between showing the time in 24-hour
notation or 12-hour AM/PM notation. The default is 24-hour
notation.
To change time notation after initial set-up, the access level must
first be set to Installer. See section 8.12.1
Access level, page 38.
To change the time notation, do this:
1. Navigate through the screens using the navigation keys:
Uponor > Main menu > General settings >
Clock settings > Time format
Example screen:
2. Select the desired time
format and press OK.
Date format
Selecting the date format
It is possible to choose between the following date formats:
• DD/MM/YYYY
• YYYY/MM/DD
• DD Mmm YYYY
• YYYY Mmm DD
To change the date format, the access level must first be set to
Installer. See section 8.12.1 Access level, page 38.
To select the date format, do this:
1. Navigate through the screens using the navigation keys:
Uponor > Main menu > General settings >
Clock settings > Date format
Example screen:
2. Select the desired date
format and press OK.
Auto daylight saving
It is possible to set the Climate Controller C-46 to automatically
adjust the internal clock to the daylight saving time.
The following schedules for daylight saving time can be chosen:
• European zone
Select this alternative to shift between summer and winter
times using the schedule defined by the European Union.
• Fixed dates
Select this alternative to set dates to shift between summer
and winter times that are different than the European zone.
• Cancel daylight saving
Select this alternative to not use daylight saving time in
Climate Controller C-46.
To select the daylight saving schedule, do this:
1. Navigate through the screens using the navigation keys
Uponor > Main menu > General settings >
Clock settings > Auto daylight saving
Example screen:
2. Select the required daylight saving mode and press OK.
If Fixed date is selected, continue with below.

Uponor C-46 Specifications

General

Brand	Uponor
Model	C-46
Category	Temperature Controller
Language	English