Urschel COMITROL 1700 - Page 181

ITEM NO. PART NO. DESCRIPTION QTY.
— 62725 Feed Assembly, 1700, slicing head, (includes items 1–32) ............ 1
1 66595 Lower Ring Assembly, (includes items 2–5) ................... 1
2 66070 Lower Ring ....................................... 1
3 66593 Stud For Slicing Head ................................ 4
4 10251 Hex Head Cap Screw, 1/4-20 x 1/2", s.s., Nylok ................ 4
5 10007 Flat Washer, 1/4", s.s., thin .............................. 4
6 10057 Hex Head Cap Screw, 3/8-16 x 3/4", s.s. ...................... 4
7 67033 Impeller, 30 blade, slicing, angled .......................... 1
8 62195 Stud, 3/8-16 x 1-15/16" ................................. 1
9 17031 Washer ........................................... 1
10 10249 Hex Nut, 3/8-16, s.s., locking, thick .......................... 1
11 66599 Upper Ring Assembly, (includes items 12–25) .................. 1
12 66598 Feed Adapter ...................................... 1
13 66079 Knife Holder Assembly, (includes items 14–21) ................ 11
14 66080 Knife Holder, (includes items 15 & 16) ..................... 1
15 10255 Dowel Pin, 1/8 x 1/4" .............................. 2
16 22071 Knife Locating Pin ............................... 2
17 66082 Knife Holder Insert................................. 1
18 10259 Hex Nut, 10-32, s.s. ................................. 1
19 66085 Knife, slicing ..................................... 1
20 66087 Knife Clamp ..................................... 1
21 10224 Hex Head Cap Screw, 10-24 x 1/4", s.s. ................... 2
22 22130 Flat Washer, slice adjusting gage ......................... 11
23 10093 Socket Head Cap Screw, 1/4-20 x 7/8", s.s. .................. 11
24 10261 Flat Washer, #10, s.s., thick ............................. 11
25 10256 Socket Head Cap Screw, 10-24 x 3/4", s.s. ................... 11
26 62654 Upper Enclosure, 2" cutting head .......................... 1
27 66594 Washer For Slicing Head ............................... 4
28 62052 Hand Knob, 5/16-18 ................................... 4
29 63689 Funnel Hopper ...................................... 1
30 63450 Hopper Grid ........................................ 1
31 10316 Hex Head Cap Screw, 10-24 x 1/2", s.s. ...................... 4
32 10231 Hex Nut, 10-24, s.s., locking .............................. 4
— 66086 Knife, slicing, package of 132 .............................. —
ALTERNATE PARTS
33 63691 Conical Feed Hopper, (replaces hopper grid, item 30) .............. 1
34 66140 Impeller, 6 blade, angled ................................. 1
35 66838 Impeller, 12 blade, angled ................................. 1
PARTS
Feed Assembly, Slicing Head (62725)
109