3
FOREWORD .............................2
SAFETY and Safety Warning .................5
RULES FOR SAFE OPERATION ...................7
SAFETY SIGNS ..............................8
PROTECTIVE DEVICES ........................10
SAFETY SWITCH SYSTEM......................12
Safety Switch System, Safety Switch ...............12
Amplifier .................................13
Safety Switch System Test ......................14
GENERAL INFORMATION ................17
SPECIFICATIONS ............................18
Specifications, Product Limitations, Noise Emission ......18
Applications, Operating Principle ..................19
CUTTING HEADS AND IMPELLERS................20
Cutting Heads, Impellers .......................20
Urschalloy Cutting Heads, Fabricated Cutting Heads .....21
INSTALLATION ..........................23
SHIPMENT, PRE-INSTALLATION, LOCATION, LIFTING ...24
Machine Shipment, Pre-installation Plan, Location,
Lifting the Machine ..........................24
ELECTRICAL POWER .........................25
Electrical Power.............................25
OPERATION
and Safety Warning
............27
START-UP, STOPPING AND FEEDING ..............28
Start-up Procedure ...........................29
Stopping Procedure, Feeding Method ...............29
MACHINE OVERLOAD OR JAM ..................30
Motor Overload, Correcting Machine Overload or Jam ....30
(continued)
contents
To Next Page
Loading...
