3
FOREWORD ..............................2
SAFETY
RULES FOR SAFE OPERATION....................9
SAFETY SIGNS ..............................10
PROTECTIVE DEVICES ........................12
OPERATION
GENERAL INFORMATION .......................16
Specifications, Applications, Product Limitations ........16
Operating Principle, Operating Speeds, Feed Assemblies ..17
GENERAL INFORMATION, Cutting Heads ............18
Operating Principle, Description...................18
Sizes of Cut, Impellers.........................20
GENERAL INFORMATION, Microcut Heads ...........21
Operating Principle, Description...................21
Sizes of Cut, Impellers.........................22
GENERAL INFORMATION, Slicing Heads ............23
Operating Principle, Description, Sizes of Cut, Impellers ...23
INSTALLATION ..............................24
Machine Shipment, Pre-Installation Plan, Location,
Product Feed and Discharge Systems..............24
Electrical Power .............................25
Oil Supply, Air Supply .........................26
SAFETY SWITCHES...........................28
Safety Switch Test ...........................28
START-UP AND STOPPING ......................30
Pre-start Checklist ...........................30
Start-up Procedure, Stopping Procedure .............31
FEEDING PRODUCT ..........................32
Feeding Method, Speed Control...................32
MOTOR OVERLOAD OR JAM ....................33
Motor Overload, Correcting Machine Overload or Jam ....33
MAINTENANCE
CLEANING .................................36
Importance of Daily Cleaning & Procedures ...........36
(continued)
contents
To Next Page
Loading...
