Vaisala FS11 - Figure 53 Pushing Control Cable into Optics Head; Figure 54 Transmitter Resp. Receiver Module, Control

Chapter 6 _______________________________________________________________ Maintenance
VAISALA _______________________________________________________________________ 151
Figure 53 Pushing Control Cable into Optics Head
1207-026
Figure 54 Transmitter Resp. Receiver Module, Control
Cable Disconnected
The following numbers refer to Figure 54 above:
1
=
Hood thermistor cable
2
=
Control cable
3
=
Opening tool
8. Use the special tool to unlock the control cable connector and
disconnect control cable from the receiver/transmitter module