Appendix A ______________________________________________________ Serial Status Formats
VAISALA______________________________________________________________________ 347
The RVP900 can optionally generate this “internal” QBITE packet. These
values are copies of data available from the GPARM command. Regular
GPARM values are labelled with “GP” followed by the word number.
Those in the dspExParmIO structure are labelled with “EX” followed by
the word number. For more details, see Section 7.9 Get Processor
Parameters (GPARM) on page 290.
23 SOPRMS Status 14–21
D6 = <spare>
D5 = <spare>
D4 = <spare>
D3 = <spare>
D2 = <spare>
D1 = GP31,D15 = <spare>
D0 = GP31,D14 = <spare>
24 Status Bits 6 5 4 3 2 1 0
25 Status Bits 13 12 11 10 9 8 7
26 Status Bits 20 19 18 17 16 15 14
27 Status Bits 27 26 25 24 23 22 21
28 Status Bits 34 33 32 31 30 29 28
29 Status Bits 41 40 39 38 37 36 35
30 Status Bits 48 47 46 45 44 43 42
31 Status Bits 55 54 53 52 51 50 49
32 Status Bits 62 61 60 59 58 57 56
33 Status Bits 63
34-43 <spare>
44 END OF MESSAGE (FF Hex)
Table 15 Internal BITE Packet (RVP900 to Host) (Continued)
Char Function
To Next Page
Loading...