Page 5 of 244
Safety Information
X-rays can be dangerous if not used properly, followed by safety instructions. All safety instructions
and warnings must be carefully observed to guarantee the maximum protection of technicians from
X-Ray hazards. To operate and service the device, follow the instructions contained in this manual.
Operator Qualifications
This equipment can only be operated or serviced by VATECH
authorized engineers who are fully trained. To operate this
equipment, all operators must:
• have read and understood the Technical manual before
application.
• be familiar with the fundamental structures and functions of
the equipment with enough experience.
• Only VATECH authorized operator can handle the electrical
circuit board, and an understanding of the electric and
electrical system is required.
Be able to recognize operation malfunction and implement
appropriate measures to take care of irregularities.
General Safety Precautions
• To operate and service the device, following instructions,
Note, Important, Caution, and Warning must be carefully
• Do not place any objects within the equipment operational
boundary. It can physically damage equipment.
• Ensure that this medical equipment is kept away from
water, moisture, or foreign substances at all times.
• The sudden change of temperature may affect equipment
operation conditions by causing condensation. Wait until
the equipment reaches room temperature then turn it on.
This product may only be operated with VATECH original
accessories or third-party accessories only approved by VATECH
Co., Ltd.
To Next Page
Loading...
