216
CLUTCH
Ä.70017 Tool, clutch pedal spring removal and installation
Ä.70081 Mandrel, clutch disc centering
67.7813.9503 Tooling, clutch disc repair
67.7822.9517 Jig, clutch disc lining renewal
67.7851.9500 Mandrel, clutch disc lining rivetting
TRANSMISSION
Ä.40006 Puller, front input shaft bearing
Ä.55035 Jointed box spanner, gearbox removal and installation
41.7816.4068 Input shaft fixing arm
41.7816.4069 Tool for fitting (removing) circlip to (from) output shaft
41.7853.4028 Mandrel for fitting output shaft bearing
41.7853.4032 Mandrel, installation of intermediate shaft bearing
41.7853.4039 Mandrel, installation of output shaft oil seal
67.7853.9558 Mandrel for driving on transfer case differential bearing
DRIVE LINE
Ä.70025 Clasp, removal and installation of flexible coupling
41.8734.4092 Gauge for selection of propeller shaft universal joint bearing circlips
67.7823.9522 Cramp, renewal of universal joint spider
67.7853.9533 Tool for pressing in front wheel CV joint oil seal ring
67.7853.9537 Installation tool, front wheel CV joint rubber boot
DRIVE AXLES
Ä.45008 Removal tool, driving pinion rear bearing inner race
Ä.45028 Rest, removal of differential box bearing inner race
Ä.55085 Spanner, differential bearing nuts
Ä.70152 Tool for pressing rear bearing inner race to driving pinion
Ä.70157 Installation tool, axleshaft oil seal
Ä.70171 Tool for pressing in driving pinion rear bearing outer race
Ä.70172 Pair of flanges to be fitted to rear axle beam ends during its inspection (truing)
Ä.70184 Tool to determine shim thickness to adjust clearance in final drive gear meshing
Ä.70185 Tool for pressing in driving pinion front bearing outer race
Ä.70198 Tool for pressing out driving pinion bearing outer race
67.7823.9530 Installation tool, axleshaft lockring
67.7823.9529 Removal tool, lockring from axleshaft
Ä.95601/R Tool for checking reliable pressing of lockring onto axleshaft
Ä.95688/R Tool for adjusting clearance in drive gear/crown wheel meshing and differential bearing tightening
Ä.95690 Tool for selecting drive pinion shim thickness
Ä.95697/5 Socket, dynamometer 02.7812.9501
02.7812.9501 Dynamometer for checking rotational resistance moment of drive axle pinion and steering worm shaft
67.7812.9520 Spanner, front axle pinion adjustment
02.7834.9504 Measuring tool, free axial play of axleshaft
67.7823.9516 Removal tool for axleshaft, rear axle
67.7853.9559 Rest, differential bearing removal
67.8701.9508 Bracket with endpiece to tool Ä.95688/R for adjusting front axle pinion
FRONT SUSPENSION
Ä.47045 Tool for pressing out silent blocks of suspension upper arms
Ä.57034/R Wrench, shock-absorber cartridge nut
To Next Page
Loading...
