Vertical SBX IP 320 - Page 175

Rerouting 165
SBX IP 320 Features & Operation Guide
To activate Call Forward to VMIB:
1. Lift the handset or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Dial the Call Forward code (1-4).
4. Dial VMIB selection code number that will receive the call.
5. Replace the handset and go on-hook.
To deactivate Call Forward:
1. Lift the handset or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward cancel code #.
Call Forward, No Answer
When the station user does not answer within a predetermined amount time, the call can be
forwarded to an alternate location.
Operation
To activate call forward for when there is no answer:
1. Lift the handset or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Dial a Call Forward type code 3.
4. Dial Station, Group or VMIB number to receive the call.
To assign {CALL FORWARD} button at a flexible button:
1. Press the [TRANS/PGM] button.
2. Press a flexible button.
3. Press the [DND/FOR] button.
4. Assign the Call Forward type 3.
5. Dial the destination that will receive the call.
6. Press the [HOLD/SAVE] button.