Rerouting 166
SBX IP 320 Features & Operation Guide
To activate Call Forward:
1. Press the assigned flexible button.
2. The LED of [DND/FOR] button is flashing and the function assigned to the flexible
button is activated.
To deactivate Call Forward:
1. Lift the handset or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Dial Call Forward cancel code #.
Admin Programming
• Call Forward No Answer Timer (PGM 181 - FLEX 1)
Call Forward, Busy/No Answer
A User can direct the System to re-route calls to another station, group or VMIB when the
Station is busy and/or does not answer in a predefined "No Answer" time. Incoming CO Lines,
transferred CO Lines, and ringing Intercom calls are forwarded.
Operation
To activate call forward, when the line is busy or not answer:
1. Lift the handset or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Dial the Call Forward type code 4.
4. Dial Station, Group or VMIB number that will receive the call.
To assign {CALL FORWARD} flexible button:
1. Press the [TRANS/PGM] button.
2. Press a flexible button.
3. Press the [DND/FOR] button.
4. Assign the Call Forward type 4.
5. Dial the destination that will receive the call.
6. Press the [HOLD/SAVE] button.
To Next Page
Loading...
