Software Upgrade 191
SBX IP 320 Features & Operation Guide
9. Click on the Start button; the MBU software upgrade will begin.
10. When the ROM file is finished downloading, the SBX IP 320 System will erase the
previous ROM data and start to fill SBX IP 320 ROM area with the downloaded ROM
file.
Conditions
• While in the upgrade process, other features do not work in the system.
• When the SBX IP 320 MBU software upgrade is finished without completing, you can
retry to upgrade by doing the whole process again.
• If the ROM files you want to send are invalid, the MBU software upgrade will not be
started.
• The Serial port should be connected to COM port 2 in the MBU.
Admin Programming
• RS-232C Port Setting (PGM 174)
To Next Page
Loading...
