Vertical SBX IP 320 - Call by Routing Table

Voice Service 218
SBX IP 320 Features & Operation Guide
4. Dial #; then start recording after hearing the announcement "Record your message" and a
confirmation tone.
5. Press the [HOLD/SAVE] button.
-or-
Press the [SPEAKER] button to finish the recording; a confirmation tone sounds.
To delete a user greeting at a station:
1. Press the [TRANS/PGM] button.
2. Dial 66.
3. The User greeting is deleted and Forward is deactivated.
To activate call forward to VMIB from a station:
1. Go off-hook or press the [SPEAKER] button.
2. Press the [DND/FOR] button.
3. Dial the forward type (1-4).
4. Dial the # key; a confirmation tone is heard.
To deactivate call forward to VMIB from a station:
Press the [DND/FOR] button.
To leave a voice message wait at a Station:
1. The caller will hear the User greeting and the "Record your message" announcement.
2. After a beep tone, record your message.
3. Hang-up to complete recording.
To retrieve a recorded voice message wait at the Station:
1. Press the flashing [CALLBK] button; for SLT and 2/8 BTN DKTU, dial 557.
2. The message number prompt is heard and the voice message (FIFO or LIFO) and Time &
Date prompt for the message is played.