Voice Service 219
SBX IP 320 Features & Operation Guide
3. Pressing the [CONF] button, the current message is deleted and the next message is
heard.
• For SLT and 2/8 BTN DKTU, Dial # 1, and press the [HOLD/SAVE] button;
the current message is saved and the next message is heard.
• For SLT and 2/8 BTN DKTU, dial # 2, and press the [CALLBK] button, the
current message is played again.
• For SLT and 2/8 BTN DKTU, dial # 3.
4. Pressing the [ADD] soft button, you can record an additional message (possible with
7224D which has 3 soft keys).
5. Pressing the [REWIND] soft button, you can rewind the current message with VM MSG
Rewind Timer (possible with 7224D which has 3 soft keys).
Conditions
• There is no time limit to record user greeting in a station.
• When a caller leaves a voice message wait, the recording time is controlled by Valid User
Message Timer (PGM 181 - FLEX 4) and VMIB User Record Timer (PGM 181 - FLEX
3). When the recorded message is shorter than the Valid User Message time, the message
is not saved. Also, if the User Record Timer expires, a confirmation tone is heard and the
message is saved in the station.
• If the station has several messages to be retrieved by pressing the [CALLBK] button, the
message only with station number will be retrieved first. (Message wait with station
number -> VMIB Message wait -> CLI Message wait -> VM group Message wait)
• Pressing the [CALLBK] button at the calling station before the user greeting is played
causes the message wait with only station number to be saved in the called station.
• When a user calls a station which is forwarded to VMIB, they will hear the user greeting
and a beep tone. After the beep tone, the user can leave a voice message.
• Each station may have up to 800 VMIB message waits.
• If all the VMIB ports are busy, ring-back tone will be provided instead of the user
greeting. Also, the VMIB Station Forward Timer is started to retry to answer.
• A User can leave and receive message wait using an SLT with message wait lamp.
• Individual user greetings and VMIB message waits are protected from system reset.
• To retrieve left message wait, the order of playing is changeable. Originally, TIME,
DATE, and a left message are played. Depending on how ADMIN is set, DATE, TIME,
and a left message are played.
To Next Page
Loading...
