Vertiv Avocent User Manual

G.5 Hardware
The appliance has a boot menu option to help you troubleshoot hardware issues. Choosing to boot the appliance to its
hardware diagnostics mode can quickly help you identify if it has bad memory.
To identify other types of hardware problems, issue the following shell commands using an appliance that boots properly:
TYPE COMMAND
Fan Failure cat /sys/devices/platform/dcima_hwmon.2560/fan*
Temp Issues cat /sys/devices/platform/dcima_hwmon.2560/temp*
Power Supply issues cat /sys/devices/platform/dcima_hwmon.2560/voltage*
Table G.1 Shell Hardware Diagnostic Commands
If the diagnostic test reveals a hardware failure, contact Vertiv Technical Support. Firmware bugs can be resolved through a
clean load of firmware via the NetBoot menu or USB_boot procedure.
Vertiv | Avocent® Universal Management Gateway Appliance Installer/User Guide | 102

Vertiv Avocent Specifications

General

Ports	4
Network Interfaces	2 x 10/100/1000Base-T Ethernet
Management	Web-based, CLI
Remote Access	IP
Authentication	Local, LDAP, RADIUS, TACACS+
Encryption	AES
Operating Temperature	32 to 104°F (0 to 40°C)