Need help?Do you have a question about the Vertiv Avocent and is the answer not in the manual?
General| Ports | 4 |
|---|---|
| Network Interfaces | 2 x 10/100/1000Base-T Ethernet |
| Management | Web-based, CLI |
| Remote Access | IP |
| Authentication | Local, LDAP, RADIUS, TACACS+ |
| Encryption | AES |
| Operating Temperature | 32 to 104°F (0 to 40°C) |
Covers security settings to control network services and access to the appliance.
Methods for configuring the appliance via CLI, console, or Ethernet ports.
Procedure for connecting the appliance to the primary network for management.
Configuring network settings, including IP addressing and network modes.
Information on configuring firewall rules for appliance access and traffic control.
Specifies necessary ports to open for appliance administration and functionality.
Configuration of hostname, DNS, domain name, and network modes (Normal, Failover, Failover-Routed).
Management of user accounts, roles, groups, and permissions for appliance access.
Configuring authentication methods like LDAP, DSView, and local accounts.
Settings for configuring autosense ports for serial or network modes.
Adding, deleting, and managing Service Processors (SPs) connected to the appliance.
Managing SP firmware, including adding to repository and upgrading.
Storing and managing passwords for SP targets and setting up rescue accounts.
Configuring serial console ports, CAS settings, and data buffering.
Managing KVM over IP functionality, including UMIQ modules and session optimization.
Troubleshooting steps for issues encountered when discovering or manually adding SPs.
Troubleshooting common appliance issues related to LAN/WAN performance and KVM sessions.
Using appliance shell commands for advanced troubleshooting of network and performance issues.
To Next Page
