• Targets Tab - Power Outlet - Properties - Lock
• Targets Tab - Power Outlet - Properties - Unlock
• Targets Tab - Service Processor - <SP>- System - Power
• Targets Tab - Service Processor - <SP>- System - Enclosure
• Targets Tab - Service Processor - <SP>- System - Time
• Targets Tab - Service Processor - <SP>- Logs - Clear Log
• Targets Tab - Service Processor - <SP>- Alerts
View Logs
If you allow View Logs rights, you have rights to the following:
• Targets Tab - Service Processor - <SP>- Logs - Download Log
• Targets Tab - Serial Console - Logs
• Targets Tab - Service Processor - <SP>- Sessions - SoL Session History
• Targets Tab - Service Processor - <SP>- Sessions - SEL
Physical Receptacle Control
If you allow Physical Receptacle Control rights, you have rights to the following:
• Targets Tab - Power Outlet - <Power Outlet>- Properties - On
• Targets Tab - Power Outlet - <Power Outlet>- Properties - Off
• Targets Tab - Power Outlet - <Power Outlet>- Properties - Cycle
• Targets Tab - PDU - <PDU>- Outlets - On
• Targets Tab - PDU - <PDU>- Outlets - Off
• Targets Tab - PDU - <PDU>- Outlets - Cycle
Physical KVM
If you allow Physical KVM rights, you have rights to the following:
• Targets Tab - Appliance - Remote Access
• Targets Tab - UMIQ - <KVM switch> - Connect
Virtual KVM
If you allow Virtual KVM rights, you have rights to the following:
• Targets Tab - Service Processor - <SP>- Sessions - Virtual KVM/Media
Virtual Media
If you allow Virtual Media rights, you have rights to the following:
• Targets Tab - UMIQ - <KVMswitch>
Physical Serial
If you allow Physical Serial rights, you have rights to the following:
• Targets Tab - Appliance - Remote Access
• Targets Tab - Serial Console - <serial device>- Connect
Virtual Receptacle Control
If you allow VirtualReceptacle Control rights, you have rights to the following:
• Targets Tab - Service Processor - <SP>- System - Power
Vertiv | Avocent® Universal Management Gateway Appliance Installer/User Guide | 35
To Next Page
