Vertiv Avocent User Manual

ORDER SERVICE ACTION USE-CASE RECOMMENDATION
14 srv-SNMP-Traps Accept Only needed if monitoring SNMP devices for the Trellis ™ platform or managing NetPDUs.
15 srv-Adobe-Flex Accept Needed to access the appliance web UI, set to DROP to disable the web UI.
16 srv-DSView-proxy Accept
Needed to access appliance targets with DSView™ software, set to DROP to disable DSView™ software
support.
17 srv-DSView-plug-in Accept
Needed to access/manage the appliance with DSView™ software, set to DROP to disable DSView™
software support.
18
srv-Data-logging-
DSView
Accept
Needed to monitor the appliance with the DSView™ software, set to DROP to disable DSView™ software
support.
19
srv-Discovery-
protocol
Accept
Needed to discover the appliance with the DSView™ software, set to DROP to disable DSView™
software support.
20 srv-DRIP-protocol Accept Needed on private ports to discover and manage UMIQ modules, set to DROP to disable KVM support.
21 srv-Security-protocol Accept
Needed to access/manage the appliance with the DSView™ software, set to DROP to disable DSView™
software support.
22 srv-PXE-boot-server Accept Not needed for current appliance features, set to DROP.
23
srv-Trellis-Platform-
OHS
Accept
Needed for Trellis ™ platform software management and monitoring support, set to DROP if not using
Trellis ™ platform software.
24 srv-Trellis-Event Accept
Needed for Trellis ™ platform software management and monitoring support, set to DROP if not using
Trellis ™ platform software.
25 srv-Trellis-Event-2 DROP Don't change this default for any reason.
26 srv-UMG-Service-1 DROP Don't change this default for any reason.
27 srv-UMG-Service-1 DROP Don't change this default for any reason.
28 srv-UMG-Service-2 Accept
Needed for Trellis ™ platform software management and monitoring support, set to DROP if not using
Trellis ™ platform software.
29 srv-UMG-Service-4 Accept
Needed for Trellis ™ platform software management and monitoring support, set to DROP if not using
Trellis ™ platform software.
30 srv-UMG-Service-5 Accept
Needed for Trellis ™ platform software management and monitoring support, set to DROP if not using
Trellis ™ platform software.
31 srv-UMG-Service-6 Accept Set to DROP.
32 srv-UMG-Service-7 Accept Needed to support KVM sessions to UMIQ modules, set to DROP to disable KVM support.
33 srv-UMG-Service-8 Accept Needed to access the appliance web UI, set to DROP to disable the web UI.
34 srv-UMG-Service-8 DROP Needed only by the local host for the VGA console, Don't change this default for any reason.
35 srv-UMG-Service-9 DROP Needed only by the local host for the VGA console, Don't change this default for any reason.
36 srv-UMG-Service-10 Accept Needed for direct serial port access using Telnet, set to DROP in not using Telnet.
37 srv-UMG-Service-11 Accept Set to DROP.
38 srv-UMG-Service-12 DROP Don't change this default for any reason.
39 srv-UMG-Service-13 DROP Don't change this default for any reason.
40 srv-Velocity-BACNet Accept
Only needed if monitoring BACnet over IP devices for the Trellis ™ platform, set to DROP if not using the
Trellis ™ platform.
41 srv-Modbus Accept
Only needed if monitoring Modbus over IP devices for the Trellis ™ platform, set to DROP if not using the
Trellis ™ platform.
42 srv-DNS Accept Needed to support DNS resolution, set to DROP to block DNS support.
48 srv-KVM-session Accept Needed to support KVM sessions to UMIQ modules, set to DROP to disable KVM support.
49 srv-KVM-session Accept Needed to support KVM sessions to UMIQ modules set to DROP to disable KVM support.
512 Any DROP Needed to protect general packet relay, not recommended to be changed
Vertiv | Avocent® Universal Management Gateway Appliance Installer/User Guide | 18

Vertiv Avocent Specifications

General

Ports	4
Network Interfaces	2 x 10/100/1000Base-T Ethernet
Management	Web-based, CLI
Remote Access	IP
Authentication	Local, LDAP, RADIUS, TACACS+
Encryption	AES
Operating Temperature	32 to 104°F (0 to 40°C)