4. From the PDU field, select the first PDU in the delta and click the Sensor 1 button.
5. From the PDUfield, select the second PDU in the delta and click the Sensor 2 button.
6. Click Apply. The delta appears in the PDU Temperature Sensors Delta table.
To view the delta calculation, click the Sensors tab then click Delta. The delta appears in the PDU Temperature Sensors
Delta table.
To delete a delta calculation:
1. From the sidebar, click Sensors - PDU Temperature Sensors Delta.
2. Check the box next to the delta you want to delete then click Delete.
Vertiv | Avocent® Universal Management Gateway Appliance Installer/User Guide | 65
To Next Page
Loading...
