Video Devices PIX-E5 - Page 39

39
PIX-ASSIST MONITORING SUITE
setting sub-setting Description options
Position Use this setting to position the frame on
the screen.
• Centered
• To p
• Custom
Position
Mask See-Thru Use this setting to adjust the opacity of
the masked area outside the rectangular
frame.
Set to 0% for fully opaque and 100% for
full transparency.
• 0% - 100%
Center &
Grid
Center Use this setting to enable the display of a
cross and/or dot, superimposed at the cen-
ter point of the video image.
• Off
• Cross
• Dot
• Cross+Dot
Center Color Use this setting to adjust the color of the
cross and/or dot, if used.
• White
• Light Gray
• Gray
• Dark Gray
• Black
• Red
• Green
• Blue
Grid Use this setting to enable the display of a
grid marker pattern of lines, superimposed
over the video image. If set to 1/3, the
screen is divided into a grid of 9 squares. If
set to 1/4, the screen is divided into a grid
of 12 squares.
i The grid, if enabled, will only appear
within Frame 1. Grid markers do not ap-
ply to Frame 2.
• Off
• 1/3
• 1/4
Grid Color Use this setting to adjust the color of the
grid lines if that marker pattern is used.
• White
• Light Gray
• Gray
• Dark Gray
• Black
• Red
• Green
• Blue