Rev AA Selecting a New Job 4-5
Videojet DataFlex 6420 Operator Manual
Alternatively, you can type the name of the job using the keypad
(Refer “Changing Variable Text Information” on page 4-7).
If the job includes information that you can change (i.e, job variables
such as, batch codes or expiration date), UI prompts you to choose the
information that you want to modify. In the example in Figure 4-6,
there is only one item of variable information, the Sell By date. The
current value for this date is 13 June 2013, as shown in the data
window.
Figure 4-5: Job Selection
Figure 4-6: Variable Information in Data Window
To Next Page
Loading...