Viessmann Vitocell 360-M User Manual

3.2 Specification
The collectors are available with 2 different absorber coatings. Type
SV2D has a special absorber coating that allows these collectors to
be used in coastal regions.
Distance to the coast:
■ Up to 100 m:
Only use type SV2D
■ 100 to 1000 m:
Type SV2D is recommended
Note
Viessmann accepts no liability if Vitosol 200-FM, type SV2F/SH2F
are used in these regions.
Specification
Type SV2F SH2F SV2D
Gross area
(required when applying for subsidies)
m
2
2.51 2.51 2.51
Absorber area
m
2
2.31 2.31 2.32
Aperture area
m
2
2.33 2.33 2.33
Spacing between collectors mm 21 21 21
Dimensions
Width mm 1056 2380 1056
Height mm 2380 1056 2380
Depth mm 90 90 90
Collector operating range output values
Optical efficiency
– Absorber area
– Gross area
% 82.3
75.7
82.6
76.0
Heat loss factor k
1
– Absorber area
– Gross area
W/(m
2
· K)
4.421
4.069
4.380
4.031
Heat loss factor k
2
– Absorber area
– Gross area
W/(m
2
· K
2
)
0.022
0.020
0.037
0.034
Theoretical output values across entire temperature
range
Optical efficiency
– Absorber area
– Gross area
% 82.7
76.1
82.9
76.3
82.0
75.7
Heat loss factor k
1
– Absorber area
– Gross area
W/(m
2
· K)
4.791
4.410
4.907
4.516
3.553
3.280
Heat loss factor k
2
– Absorber area
– Gross area
W/(m
2
· K
2
)
0.025
0.023
0.029
0.026
0.023
0.021
Thermal capacity
kJ/(m
2
· K)
4.89 5.96 5.47
Weight kg 39 40 41
Liquid content
(heat transfer medium)
Litre 1.83 2.4 1.83
Permiss. operating pressure
With installation of an 8 bar safety valve (accessory)
bar/MPa
bar/MPa
6/0.6
8/0.8
6/0.6
8/0.8
6/0.6
8/0.8
Max. stagnation temperature in the collector °C 145 145 205
Steam-producing power
– Favourable installation position
W/m
2
0
*1
0
*1
60
– Unfavourable installation position
W/m
2
0
*1
0
*1
100
Connection Ø mm 22 22 22
Specification for determining the energy efficiency class (ErP label)
Type SV2F SH2F SV2D
Aperture area
m
2
2.33 2.33 2.33
The following values apply to the aperture area:
– Collector efficiency η
col
, at a temperature differential
of 40 K
% 59 58 63.9
– Optical efficiency % 82 82 81.7
– Heat loss factor k
1
W/(m
2
· K)
4.75 4.86 3.538
– Heat loss factor k
2
W/(m
2
· K
2
)
0.024 0.028 0.023
Incidence angle modifier IAM 0.89 0.89 0.91
*1
Provided manufacturer's specifications for the filling pressure of the solar thermal system are adhered to.
Vitosol 200-FM, type SV2F/SH2F and Vitosol 200-F, type SV2D
(cont.)
16
VIESMANN
VITOSOL
3
5822 440 GB

Viessmann Vitocell 360-M Specifications

General

Brand	Viessmann
Model	Vitocell 360-M
Category	Heating System
Language	English