104 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
9. Setup SNMP Parameters
CONFIG. / NETWORK SERVICE
Procedure
Table 9-8 SNMP parameters
SNMPv1 &
Write Community
Read Security Name
Security Level
Auth Algorithm
Write Security Name
Read Community
Trap Community
Trap Address
Trap Port
SNMPv2c
SNMPv3
Click the button ON.
Enter a value manually.
Enter a value manually.
[Setting method]
[Setting method]
[Setting method]
[Default Value] OFF
Version of SNMP.
Name of write community
Name of read security
Security Level between SNMP manager and agent,
Authentication Algorithm, includes MD5and SHA.
includes three levels:
Noauth: No authentication and no encryption
Auth: Authentication but no encryption
Priv: Authentication and encryption
Name of write security
Name of read community
Community string of trap
The trap community string allows the manager to
receive asynchronous information from the agent.
IP address of the trap.
Management port of accepting message from trap.
The write community only can modify data.
The write community only can read data.
SNMPv1 and SNMPv2c use communities to establish
SNMPv3 uses community strings, but allows for secure
Version of SNMP.
SengParameter DESCRIPTION
three community names, write community, read
community and trap.
trust between managers and agents. Agents support
authentication and communication between SNMP
manager and agent.
the drop-down list box.
the drop-down list box.
[Setting method] Select a value from
[Setting method] Select a value from
[Default Value] Blank
[Default Value] Blank
To Next Page
Loading...
Need help?
General
