105User Manual Visit the ViewZ USA website at https://www.viewzusa.com
9. Setup SNMP Parameters
CONFIG. / NETWORK SERVICE
Procedure
Table 9-8 SNMP parameters
Auth Password
Encry Algorithm
Encry Password
SNMP Port
Enter a value manually.
Enter a value manually.
Enter a value manually.
[Setting method]
[Default Value] 16
[Setting method]
[Setting method]
Authentication password
Encryption Algorithm, includes DES and AES.
Encryption password
Port of SNMP
SengParameter DESCRIPTION
Step 4 Click Apply.
• The message "Apply success!" is displayed. Click Conrm. The system saves the sengs.
• If other informaon is displayed, set the parameters correctly.
the drop-down list box.
[Setting method] Select a value from
[Default Value] Blank