109User Manual Visit the ViewZ USA website at https://www.viewzusa.com
Table 10-3 User Add, Modify.Delete parameters
Add
Modify
Delete
1. Click Add. The Add User page is displayed, as shown
1. Click icon & modify-User-page is displayed.
Select the user from the User list. Click icon, the
message “Confirm to delete?” is displayed, click OK,
then the group is deleted successfully.
2. Modify the user name, password, group or privilege.
3. Click OK. The user is modified successfully. The User
2. Enter a user name, password, confirm password.
3. Select a group from the drop down list box.
4. Enter the notes (Optional).
5. Check the privilege.
6. Click OK. The user is added successfully.
in Figure 8-2.
page is displayed.
DescriponFuncon Procedure
user as shown in Figure 8-2
the drop-down list box.
Add an administrator or a common
Modify the user name, password,
Delete a user.
group or privilege.
CONFIG. / PRIVILEGE MANAGER
1. Configuration of Permission for User
Procedure
To Next Page
Loading...
Need help?
General
