ViewZ VZ-IP-PVM-N Series User Manual

70 User ManualVisit the ViewZ USA website at https://www.viewzusa.com
9. Converse
CONFIG. /INTELLIGENT ANALYSIS
Settings
Output Channel
SMTP
Click the parameter and input an ID.
[How to set]
[Default Value] OFF
is connected to an external alarm indicator, the alarm
indicator signals when an alarm is triggered.
If you check to set the Output Channel and the device
If you turn on, system will send a notice email.
You can set the email on Network Service / SMTP.
SengParameter DESCRIPTION
Table 6-9 Converse Parameter Description
Deployment Time Settings
Seng deployment me: Click to select any me point within 0:00-24:00 from Monday to Sunday; or hold
down the le mouse buon, drag and release the mouse to select the deployment me within 0:00-24:00
from Monday to Sunday, and then click Apply to successfully set the me. Note: When you select me by
dragging the cursor, the cursor cannot be moved out of the me area. Otherwise, no me can be selected.
Deleng deployment me: Select the week on the le of set me which becomes red aer selecon, as
shown in Figure 6-26, and then click Delete to erase the deployment me. You can also delete selected
deployment me by means of inverse selecon.
Figure 6-26 Deployment Time Setting Interface

ViewZ VZ-IP-PVM-N Series Specifications

General

Brand	ViewZ
Model	VZ-IP-PVM-N Series
Category	Monitor
Language	English