Event-ID Description
0xE0CC Communication error MPI / Serial
ZInfo1: Code
1: Wrong priority
2: Buffer overflow
3: Frame format error
4: Wrong SSL request (SSL-ID not valid)
5: Wrong SSL request (SSL-SubID not valid)
6: Wrong SSL request (SSL-Index not valid)
7: Wrong value
8: Wrong RetVal
9: Wrong SAP
10: Wrong connection type
11: Wrong sequence number
12: Faulty block number in the telegram
13: Faulty block type in the telegram
14: Inactive function
15: Wrong size in the telegram
20: Error writing to memory card
90: Faulty buffer size
98: Unknown error
99: Internal error
0xE0CD Error at DP-V1 job management
0xE0CE Error: Timeout at sending of the i-slave diagnostics
0xE0CF Timeout at loading of a new HW configuration (timeout: 39 seconds)
0xE100 Memory card access error
0xE101 Memory card error file system
0xE102 Memory card error FAT
0xE104 Memory card error at saving
0xE200 Memory card writing finished (Copy Ram2Rom)
0xE210 Memory card reading finished (reload after overall reset)
0xE21E Memory card reading: Error at reload (after overall reset), file "Protect.wld"
too big
0xE21F Memory card reading: Error at reload (after overall reset), file read error, out
of memory
0xE300 Internal flash writing finished (Copy Ram2Rom)
0xE310 Internal flash writing finished (reload after battery failure)
0xE311 Internal flash fx0000yy.wld file too big, load failure
VIPA System 300S Deployment CPU 313-6CF13
VIPA specific diagnostic entries
HB140 | CPU-SC | 313-6CF13 | GB | 15-50 81
To Next Page
Loading...