W Box 0E-4CHNVR2TB - Page 14

Network Video Recorder
User Manual
Wizard
8
Issue: V4.2 (2018-08-15)
Table 1-2 NVR network parameters
Parameter
Description
Setting
Obtain IP address
automatically
The device automatically obtains
the IP address from the DHCP
server.
[Setting method]
Click the button on to
disable DHCP.
NOTE
To query the current IP
address of the device, you
must query it on the
platform based on the
device name.
DHCP IP
IP address that the DHCP server
assigned to the device.
N/A
IP Address
Device IP address that can be set as
required.
[Setting method]
Enter a value manually.
[Default value]
192.0.0.64
Subnet Mask
Subnet mask of the network
adapter.
[Setting method]
Enter a value manually.
[Default value]
255.255.255.0
Gateway
This parameter must be set if the
client accesses the device through a
gateway.
[Setting method]
Enter a value manually.
[Default value]
192.0.0.1
Obtain DNS
automatically
The device automatically obtains
the DNS address from the DHCP
server.
[Setting method]
Click the button on to
enable Obtain DNS
automatically.
NOTE
To query the current DNS
address of the device, you
must query it on the
platform based on the
device name.
DNS1
IP address of a DNS server.
[Setting method]
Enter a value manually.
[Default value]
192.168.0.1