Disassembly/Assembly Mobile Generator
100 wc_tx000575gb.fm
9.12 Replacing the Fuel Tank
See Graphic: wc_gr003350
This procedure requires a crane or hoist capable of lifting 1900 kgs.
(2000 lbs.).
Removal:
9.12.1 Disconnect the fuel hoses and the fuel sender wiring.
9.12.2 Remove the screws that secure the upper frame assembly (a) to the
lower frame (skid) (b).
9.12.3 Using an appropriate crane or hoist, lift the upper frame assembly off
the lower frame assembly.
9.12.4 Remove the screws that secure the fuel tank (c) to the lower frame
assembly.
9.12.5 Using an appropriate crane or hoist, lift the fuel tank from the lower
frame assembly.
Installation:
9.12.6 Using an appropriate crane or hoist, lower the fuel tank into the lower
frame assembly.
9.12.7 Secure the fuel tank (c) to the lower frame assembly.
9.12.8 Using an appropriate crane or hoist, lower the upper frame assembly
onto the lower frame assembly.
9.12.9 Secure the upper frame assembly (a) to the lower frame (skid) (b).
To Next Page
Loading...
Need help?
General
