Mobile Generator ECM Background Information
wc_tx000713gb.fm 29
4.4 ECM Display Screens—Start Switch in Remote Position
See Graphic: wc_gr002943
When the start switch is placed in the REMOTE position, the following
screens are displayed.
4.4.1 “Initializing”
The ECM display reads “Initializing” and shows the model of the
generator. If the model displayed does not match the model of the
generator, call Wacker Neuson Service.
4.4.2 “Unit in Auto”
The ECM displays “Unit in Auto” and the values for oil pressure,
percentage of fuel remaining, engine temperature, and voltage of the
battery.
wc_gr002944
481 P2 0 60.0
71 24% 87 12.7
1
5
678
2
3 4
Initializing
G85
Unit in Auto
0 50% 74 12.7
12
wc_gr002943
To Next Page
Loading...
