Wacker Neuson G 85 Repair Manual

ECM Background Information Mobile Generator
26 wc_tx000713gb.fm
G 85 (9305), G 125, G 160
ECM Display Description
Start of the boot-up sequence. The ECM display reads
“Initializing” and shows the model of the generator. If the
model displayed does not match the model of the gener-
ator, call Wacker Neuson Service.
The ECM displays the countdown time until the next
scheduled service. The timer starts at 250 and counts
down to 0.
The ECM displays this screen during the first cranking
cycle.
The ECM displays this screen as soon as the engine
starts. Note that some of the values such as voltage, may
not be up to their running values at this stage of the
sequence.
The ECM displays this screen to let the operator know
that the under frequency system (engine speed) has
been enabled.
At this point in the sequence, the ECM displays running
values.
The ECM displays this screen to let the operator know
that the engine protection system has been enabled.
Initializing
G 85
Time to Service
250
Cranking 1 of 3
80 P2 0 60.0
71 75% 87 12.7
Under Frequency
Enabled
480 P2 0 60.0
71 75% 87 12.7
Engine Protection
Enabled

Wacker Neuson G 85 Specifications

General

Brand	Wacker Neuson
Model	G 85
Category	Portable Generator
Language	English