Operation
Machine Monitoring 7.10
67
[en-US] | 02/2023 | 5100065071 | LTV 4L/6L | Operator’s Manual
Volts “V”—Displays the AC output voltage being produced by the genera-
tor.
Volts “V”—Displays the AC output voltage being produced by the genera-
tor.
Hertz “Hz”—Displays output frequency. This gauge should read approxi-
mately 60 Hz under a no-load condition. If the frequency is too high, check
the engine rpm.
Displays the engine rpm.
Displays the metered usage of the machine in hours(h) and minutes(m).
7