Maintenance
Checking and Draining the Containment System (if equipped) 8.6
81
[en-US] | 02/2023 | 5100065071 | LTV 4L/6L | Operator’s Manual
Brakes
Note: If the fluid level has fallen too low, bleed the brake lines to remove any
air trapped in the lines. Then, fill to the proper level with clean brake fluid.
• Check operation of brakes before each trip.
• Check level of brake fluid in actuator at front of trailer at regular intervals.
• Fill brake fluid to approximately 1 inch below top of reservoir using
DOT-3 heavy-duty brake fluid.
• Tighten filler plug securely.
8.6 Checking and Draining the Containment System (if equipped)
NOTICE
It is important to check the containment system regularly. A large amount of
fluid collected in a 24-hour period indicates a significant leak.
Environment
Use a suitable container to collect, store, and dispose of drained fluids and
lubricants in accordance with current environmental protection regulations.
When
Every 50 hours
Requirements
• Machine stopped and engine is cool to the touch
• Machine is on a level surface
• Plastic cloth and a container of sufficient volume to collect drained fluid
Overview
Certain machines are equipped with a containment system. The containment
system protects the environment by collecting fluid leaks (fuel, coolant, or oil)
which might otherwise contaminate the soil.
8
To Next Page
Loading...
Need help?
General
