Maintenance
Water sprinkling
BA RD24_RD27 en 04
163
NOTE
Observe the disposal regulations as specified by the additive
manufacturer.
After completing tank drainage, operate the additive sprinkling system
until no more separating compound comes out of the sprinkler
nozzles.
Thoroughly clean the additive tank with a jet of water.
Flush the sprinkler nozzle housings and the hoses.
Variant 1:
Screw in the drain plug [3].
Variant 2:
Close the drain [6].
Put the hose [4] on its holder [5].
Shut the maintenance flap [2].
Close the additive tank filler cap [1].
To Next Page
Loading...
