Wacker Neuson RD24 - Steering System; Lubricating Pivoted Bearing; Lubricating the Steering Cylinder Bolts

Maintenance
Steering system
BA RD24_RD27 en 04
157
4.07 Steering system
WARNING
Uncontrolled movements!
Serious injuries or death caused by unexpected steering movements.
■
Perform work on the steering system with the engine at rest and
the electrical system switched off.
■
On machines with safety strut, apply the safety strut before
maintenance work.
■
To avoid any unintended engine start by any third person: affix
a warning notice at the driver's position indicating that work is in
progress on the machine.
4.07.01 Lubricating pivoted bearing
" Lubricant only admissible if containing this marking ("Technical data",
page 165 sqq.).
1
1
1
Switch off diesel engine and remove ignition key.
Apply the articulated frame steering blocking.
Grease lubricating nipple [1].
4.07.02 Lubricating the steering cylinder bolts
" Lubricant only admissible if containing this marking ("Technical data",
page 165 sqq.).