Wacker Neuson RD24 - Switching the Parking Light, Driving Light and Work Light On;Off

Operation
Switching the parking light, driving light and work light on/off
78
BA RD24_RD27 en 04
3.11 Switching the parking light, driving light and work light on/
off
NOTE
To control parking light and driving light, use the operator
control panel.
The parking light can still be switched on when the electrical
system is switched off. To use driving light and working light,
the electrical system must be set to on.
NOTE
When the lights are set to on for a longer period of time
although the engine is stopped, the battery will be discharged
quickly.
5
1
3 4
2
1
4
Switching the parking light on/off
Requirement: Electrical system is OFF.
Press switch [1].
a
Indicator light [2] is on: Parking light lights.
a
For versions with add-on equipment:
Switch [1] lights up: Parking light lights.
Press switch [1] again.
a
Indicator light [2] is off: Parking light off.
a
For versions with add-on equipment:
Switch [1] unlit: Parking light off.
Switching the driving light on/off
Requirement: Electrical system is ON.
Press switch [1].
a
Indicator light [2] is on: The driving light is lit.
a
For versions with add-on equipment:
Switch [1] lights up: The driving light is lit.
Press switch [1] again.
a
Indicator light [2] is off: Driving light off.
a
For versions with add-on equipment: