Operation
Driving with dynamic compaction system
96
BA RD24_RD27 en 04
3.19.03 Compaction (HMV)
Display on the version with auxiliary equipment
NOTE
The HMV value indicates the currently achieved compaction.
The driver can see whether the subgrade needs further
compaction or where there is a weak point.
NOTE
If the machine is not equipped with a computer unit for HMV,
nothing will be displayed.
Pilot lights indicate the height of material compaction. The compaction
value depends on the material to be compacted. When performing
compaction work with the vibration switched on, increasing HMV values
indicate increasing material compaction or load-bearing capacity. If the
value remains the same at a precompacted place, no further compaction
is possible there.
To Next Page
Loading...
Need help?
General
