Wacker Neuson RD24 - Driving in Normal Operation

Operation
Driving
86
BA RD24_RD27 en 04
3.15.03 Driving in normal operation
1
1
2
Make ready to drive/release parking brake
Requirement: Diesel engine is running, drive lever in 0 position
Press the parking brake [1] switsch.
a
Parking brake indicator light [2] is out.
a
For versions with add-on equipment: Parking brake switch [1] unlit.
a
Machine is ready to start.
Driving forwards
Preselect the motor speed.
Move the drive lever in the F direction.
a
The machine travels forwards. The final speed depends on the
deflection of the drive lever and on the selected motor speed.
Driving backwards
Preselect the motor speed.
Move the drive lever in the R direction.
a
The reversing lights are on.
a
The machine travels backwards. The final speed depends on the
deflection of the drive lever and on the selected motor speed.
NOTE
For versions equipped with a back-up alarm, an audible signal
is heard as soon as the drive lever is in position R.
Reversing
While driving, slowly move the drive lever via the 0 position in the
opposite direction.
a
The machine brakes to a halt and accelerates in the opposite
direction, depending on the deflection of the drive lever and on the
motor speed selected.