Operation
Stopping the machine because of a fault
BA RD24_RD27 en 04
91
3.18 Stopping the machine because of a fault
NOTICE
Severe malfunctions!
Damage or destruction of machine components caused by continuing
operation despite serious faults.
■
When a serious fault is indicated, immediately stop the machine at
a safe position outside the danger zone.
■
Determine and remove the cause of the alfuction.
■
Do not use the machine again until the fault has been rectified.
[1] System info [2] Indicator for serious fault
[3] Indicator for serious fault
(STOP)
[4] Fault notification
In case of a serious fault:
a
A permanent audible signal is heard.
a
At least one warning light is lit.
a
The system information [1] indicates an error code.
For the standard version:
a
The warning light by the side of the system information [2] is flashing.
For versions with add-on equipment:
a
The STOP warning light [3] is flashing.
Further operation is inadmissible!
Park the machine out of the danger zone.
Shut down the diesel engine immediately.
Rectify the cause immediately.
NOTE
Write down the error code indicated. If you cannot correct the
error yourself, please contact the customer service.
To Next Page
Loading...
Need help?
General
