Operation
Switching the parking light, driving light and work light on/off
BA RD24_RD27 en 04
79
Switch [1] unlit: Driving light off.
NOTE
When it is set to on, the parking light will automatically change
to driving light as soon as the electrical system is set to on.
When it is set to on, the driving light will automatically change
to parking light as soon as the electrical system is switched off.
Switching high beam on/off
For versions with add-on equipment
The high beam switch [3] is inoperative.
Switching the working light on/off
NOTE
Depending on the machine's configuration, the working light
can consist of various components, e.g.
■
front and/or rear working spotlights.
■
Drum edge lighting.
Requirement: Electrical system is ON.
Press switch [4].
a
Indicator light [5] is on: Work light lights.
a
For versions with add-on equipment:
Switch [4] lights up: Work light lights.
Press switch [4] again.
a
Indicator light [5] is off: Working light off.
a
For versions with add-on equipment:
Switch [4] unlit: Working light off.
To Next Page
Loading...
Need help?
General
