Auxiliary equipment
Anti-freeze filling system for water sprinkling
222
BA RD24_RD27 en 04
Fill the piping system
Switch off the diesel engine.
Water sprinkling system functional test: Switch the water sprinkling
system on when the machine is at a standstill (see page 97).
Take the hose [1] out of its holder.
Clean the end of the hose if it is dirty.
Insert the hose into the container [3] containing antifreeze solution.
Set the change over valve [2] to the anti-freeze filling system position.
Fill the piping system until the antifreeze solution exudes out of all the
spray nozzles.
Switch off the sprinkler.
Switch off the electrical system, and remove the ignition key.
Put the hose [1] back in its holder.
Set the switchover valve [2] to sprinkle.
To Next Page
Loading...
Need help?
General
