Preface
Type plate
24
BA RD24_RD27 en 04
Machine type plate
The type plate is attached to the machine frame ("Chassis/safety
devices", page 37).
[1] Homologation (for example the
registration number for driving
on public roads)
[2] Designation
[3] Type [4] Year of manufacture
[5] Vehicle identification number
(VIN/PIN)
[6] Engine power/nominal speed
[7] Unladen weight [8] Operating weight
[9] Maximum operating weight [10] Permissible total weight
in accordance with the
StVZO (German Road Traffic
Licensing Regulations) (only
valid for transport on public
roads)
[11] Permissible axle load at the
front/rear in accordance with
the StVZO (German Road
Traffic Licensing Regulations)
(only valid for transport on
public roads)
NOTE
The vehicle identification number [5] indicates the series and
the serial number of the machine e.g. WNCxxxxxxxxxxxxxx.
NOTE
The maximum operating weight [9] is the static weight of the
machine including:
■
Working substances and lubricants
■
100 % fuel tank contents × 0.84 specific weight
■
100 % water & additive tank contents
■
75 kg for the driver
■
the static weight of all options or attachments manufacturer
the same time and approved by manufacturer (e.g., chip
spreader).
No additional ballasting is allowed.