Operation
Loading and transporting
64
BA RD24_RD27 en 04
Crane loading
Special instructions
■
Park the crane vehicle on flat ground that provides the necessary
load-bearing capacity. Comply with all applicable safety regulations
when doing so.
■
The crane's load table must correspond to the weight and to the
centre of gravity of the machine to be lifted.
NOTE
If the weight of the machine is unknown, set the maximum
operating weight (see type plate).
■
Take suitable precautions to block access to the lifting area in order to
prevent anybody entering the danger zone.
■
Attach lifting tackle to the lifting lugs provided.
■
Note the load-bearing capacity of the lifting tackle.
■
Use lifting frames or spreader beams if necessary.
■
Put the safety strut on the machine before crane loading.
To Next Page
Loading...
