138
wallaceperimetersecurity.comPhone: 866.300.1110
END USER BRIEFING INSTRUCTIONS
3. Always keep people and objects away from the gate.
4� NO ONE SHOULD CROSS THE PATH OF THE MOVING GATE.
5. Test the Gate System weekly. The gate MUST react as programmed (e.g., stop/reverse on contact with
a rigid object). The gate MUST react as programmed (e.g., stop/reverse when an object breaks the
photo eye infrared beam) while the gate is in the closing cycle. Failure to properly test inherent and
external entrapment devices on a weekly basis can increase the risk of injury or death.
6. Use the manual brake disconnect only when the gate is not moving. When the manual brake disconnect
cable is pulled a micro-switch will disable the electrical operaon of the gate.
7� KEEP THE GATE SYSTEM PROPERLY MAINTAINED. This Gate System is not a toy. Read the owner’s
manual thoroughly. Only allow trained and qualied technicians to service the gate system, for both
mechanical as well as electrical repairs.
8. The Gate System is for vehicles only. Pedestrians must use a separate gate.
9. SAVE THESE INSTRUCTIONS.
Installer’s (OR SpeedGate Owner) Name Printed: End User’s Name (Printed):
Installer’s (OR SpeedGate Owner) Signature: End User’s Signature:
Site: Date:
To Next Page
Loading...
