Wallace Perimeter Security SPEEDGATE - Speedgate General Maintenance Checklist

SPEEDGATE Installation and Maintenance Manual Revision 1 - MAY 2023
135
SPEEDGATE GENERAL MAINTENANCE CHECKLIST
Customer Signature: Customer Name (Print):
Signature of Maintenance Inspector: Maintenance Check Performed by (Print Name):
Date:
Date of next Maintenance Inspecon:
Cycle Count:
SpeedGate General Maintenance Checklist
5-SPEEDGATE GENERAL MAINTENANCE CHECKLIST Checked Good Needs
Aenon
N/A
SpeedGate Serial Number:
The following checklist is intended to record repair requirements, maintenance performed and addional
observaons pernent to the SpeedGate. Checklists must be dated, signed and retained for record-
keeping purposes.
1. Physical structure - no damage.
2. Secure hinge bolts - (90 -lbs) (122.03 N m) torque.
3. Secure bolts at drive pins and guide roller
wheel or captured roller assembly to (90 -lbs)
(122.03 N m); (top of panels).
4. Check guide roller wheel or captured roller
assembly for abnormal wear/improper funcon
(running freely/smoothly in center of guide roller
channel).
5. Check all electrical cables for proper clearance from
all moving parts inside column. Fasten as required.
6. Check post terminaon box for weather-ght seal.
Check seal on gear boxes for leaks (gearbox in each
column).
7. Check photo eye operaon; clean lens with so,
clean, dry cloth (if equipped).
8. External Stop buon (if equipped) funconal.