Waters ACQUITY - Sample Inlet; Vacuum System; Identifying Your Instrument Version

3.10.4 Fitting the ion guide assembly to the instrument ...............................................................47
3.11 Emptying the nitrogen exhaust trap ............................................................................................49
3.12 Emptying the liquid-trap bottle.....................................................................................................51
3.13 Maintaining the rotary backing pump’s oil ...................................................................................51
3.14 Gas ballasting the rotary backing pump......................................................................................53
3.15 Replacing the rotary backing pump’s demister element .............................................................53
3.16 Replacing the internal source exhaust valve (KAD)....................................................................54
3.16.1 Removing the source exhaust valve..................................................................................55
3.16.2 Fitting the source exhaust valve ........................................................................................56
A Safety advisories .....................................................................................................59
A.1 Warning symbols ..........................................................................................................................59
A.1.1 Specific warnings ................................................................................................................60
A.2 Notices..........................................................................................................................................62
A.3 Bottles Prohibited symbol .............................................................................................................62
A.4 Required protection ......................................................................................................................63
A.5 Warnings that apply to all Waters instruments and devices ......................................................... 63
A.6 Warnings that address the replacing of fuses...............................................................................67
A.7 Electrical and handling symbols ...................................................................................................68
A.7.1 Electrical symbols................................................................................................................68
A.7.2 Handling symbols................................................................................................................69
B Specifications...........................................................................................................71
B.1 Physical specifications..................................................................................................................71
B.2 Environmental specifications ........................................................................................................71
B.3 Electrical specifications.................................................................................................................71
B.4 Input/output specifications ............................................................................................................72
C Materials of construction and compatible solvents .............................................74
C.1 Preventing contamination .............................................................................................................74
June 15, 2017, 715003956 Rev. F
Page xiii