C.3.4 Solvents used commonly as diluents
The following solvents, often used as sample diluents, are not expected to adversely affect the
performance of the materials shown in the list of items exposed to solvents in the table "Items
exposed to solvent (KAD)" in the topic Items exposed to solvent.
Table C–4: Solvents used commonly as diluents
Solution Concentration
Toluene ≤ 5%
Methyl tert-butyl ether (MTBE) ≤ 5%
Hexane ≤ 5%
Dichloromethane ≤ 2%
Dimethylformamide (DMF) ≤ 5%
Dimethyl sulfoxide (DMSO) ≤ 5%
Heptane ≤ 5%
C.4 QDa solvent compatibility (KAB)
Note: The solvent compatibility information in this section refers to the KAB version of the QDa
detector, shown in the following figure:
Figure C–2: QDa detector (KAB)
June 15, 2017, 715003956 Rev. F
Page 78
To Next Page
Loading...
