WBOX Technologies 0E-13D28 - Setting Video and Audio Stream Parameters

High-Resolution IR Camera
User Manual
Web Operation
Issue V1.0 (2018-05-11)
23
Parameter
Description
Setting
Hardware Version
Firmware Version
Video Channel(s)
Channel Quantity
Alarm Input Quantity
Alarm Output Quantity
Serial Port Quantity
Network card Quantity
Step 3 Click .

If the message "Apply success!" is displayed, click OK. The system saves the
settings.

If the message "Apply failed!" is displayed, you must apply for the Parameter
Configure permission from an administrator. For details, see 4.10.1
4.4 Setting Video and Audio Stream Parameters
Procedure
Step 1 Click Configuration > Stream > Base Stream.
The Stream Configuration page is displayed, as shown in Figure 4-8.