WBOX Technologies 0E-13D28 - Privilege Management

High-Resolution IR Camera
User Manual
Web Operation
Issue V1.0 (2018-05-11)
71
Parameter
Description
Setting
Auth
Password
Authentication password.
[Setting method]
Enter a value manually.
Encry
Algorithm
Encryption Algorithm, includes DES and
AES.
[Setting method]
Select a value from the
drop-down list box.
[Default value]
Blank
Encry
Password
Encryption password.
[Setting method]
Enter a value manually.
SNMP Port
Port of SNMP.
[Setting method]
Enter a value manually.
[Default value]
161
Step 3 Click Apply.
The message "Apply success!" is displayed, and the system saves the settings.
----End
4.9 Privilege Manager
Description
You can add, modify, and delete a user in privilege manager page.
Procedure
Step 1 Choose Configuration > Privilege Manager > User.
The User page is displayed, as shown in Figure 4-36. Table 4-24 describes the
parameters.