WBOX Technologies 0E-13D28 - Configuring the SD Card or NAS Recording

Web Operation
High-Resolution IR Camera
User Manual
50
Issue V1.0 (2018-05-11)
4.6.3 Configuring the SD Card or NAS Recording
Procedure
Step 1 Choose Configuration > Device Record > Record Directory.
Step 2 Click Modify.
The Record Path Modify page is displayed, as shown in Figure 4-24.
Figure 4-24 SD card Record Path Modify page
Step 3 Set the parameters according to Table 4-13.
Table 4-13 SD card recording parameters
Parameter
Description
Setting
NAS
Enable NAS to enable record.
[Setting method]
Click button to enable
NAS.
IP Address
IP address of NAS
[Setting method]
Enter a value manually.
Path
Path of NAS.
User Name
N/A
Password
Confirm
File System
[Setting method]
Select a value from the
drop-down list box.