WBOX Technologies 0E-13D28 - Setting IP Filter Parameters

Web Operation
High-Resolution IR Camera
User Manual
62
Issue V1.0 (2018-05-11)
Parameter
Description
Setting
Image
Quality
A higher-quality image means
more storage space. Set this
parameter based on the site
requirement.
[Setting method]
Select a value from the drop-
down list box.
[Default value]
Mid
Step 4 Click Apply.

If the message "Apply success!" is displayed, and the system saves the settings.

If other information is displayed, set the parameters correctly.
----End
4.8.7 Setting IP Filter Parameters
Description
Set the IP address in specified network segment to allow access or prohibit access.
Procedure
Step 1 Choose Configuration > Network Service > IP Filter.
The IP Filter page is displayed, as shown in Figure 4-32.